Home/Tools/Capacity planner

NAS capacity planner

Estimate how much room a library needs, then check how much you can actually store with the bays and RAID level you have. Everything runs in the browser; nothing you type leaves the page.

Library and hardware

Average bitrate only; the real file depends on scene complexity and the encoder.
Usable capacity assumes identical drives and does not subtract hot spares or filesystem overhead.

Results

Library size
——
With headroom
—
Usable now
——
Verdict
—
Drives needed at minimum
—
Usable room holds
—

1 TB here is 1012 bytes; the TiB figure your OS shows is 240 bytes, which is why a 16 TB drive reads as about 14.55 TiB.

How it is calculated

Library size = total hours × (video bitrate + audio bitrate) ÷ 8. Total hours is titles times average hours; the headroom figure adds a percentage on top of the library size.

Usable RAID capacity: single/JBOD is drives times drive size; RAID1 is half the mirrored pairs; RAID5 is (drives − 1) × drive size; RAID6 is (drives − 2) × drive size. The minimum drive count is derived backwards from the same rules, with RAID1 needing at least 2 drives, RAID5 at least 3 and RAID6 at least 4.

Use this to judge scale and drive count. Hot spares, filesystem overhead, snapshots and parity cost are not included; for an exact number, measure the files you actually keep.

FAQ

Why does my 16 TB drive show only 14.55 TB?

Two number systems. Vendors label capacity in decimal, 1 TB = 1012 bytes, while the OS reports TiB, 240 bytes. A 16 TB drive works out to about 14.55 TiB. Nothing is missing, the unit changed.

How much do I get after RAID?

Single or JBOD is drives × drive size; RAID1 is half; RAID5 is (drives − 1) × drive size; RAID6 is (drives − 2) × drive size. This assumes drives of the same size.

What should I put in the headroom field?

Whatever extra space you want on top of the library itself, as a percentage; 0 if you want none. The number is added to the required capacity before the minimum drive count is worked out.

Can I buy drives straight off this number?

It is meant for scale and drive count. Hot spares, filesystem overhead, snapshots and parity cost are not in the result, so add those yourself before ordering.

Related tools